If it reads 13V then the power board thinks that the TV is On and is providing full power. 2. Agree that with Samsung LED TV when the mainboard is disconnected from the power board then backlights should turn on if backlights connected and power on the powerboard. So assuming that the backlights are connected to the powerboard and this I don't Vertical dark bands are seen on Edge-lit TVs, which have only one LED strip at both the top and bottom of the panel, and which can be easily replaced at home for around $50 worth of new parts. Horizontal dark shadows are seen on older, non-Edge-lit Samsung TVs where the backlight strips are connected in horizontal rows across the entire panel. Fourth Solution: Zap the PRAM. Shutdown your Mac, press and hold the Command+Option+P+R keys right as you turn on your Mac. Once you hear the startup chimes the second time the PRAM has been reset and release the keys, check if the backlit is working now. The reasons as to why the backlit of your keyboard does not work may be caused by software If nothing happens apart from the blue indicator remaining on, the Hitachi should be disconnected from AC power. The power button on the TV should be pressed and held for 20 seconds. After a minute, the TV should be plugged back in and the power button pressed once. If the problem persists, it indicates an internal failure that requires service. Place the Samsung LED TV backlight strip on the display. Screw the LED panel back onto the TV. 1. If the Screen Is Black, but the Sound Is Working. If you find that the screen is black, but the sound is still working on your TV, this could be due to an issue with the LED or LCD on your TV. 2. Dịch Vụ Hỗ Trợ Vay Tiền Nhanh 1s.

led tv backlight problem solution